Effects of Al doping on the electrochemical performances of LiNi0.83Co0.12Mn0.05O2 prepared by coprecipitation

The Ni-rich LiNi_0.83Co_0.12Mn_0.05O₂ (NCM83) cathode materials have drawn intensive attention due to the high energy density and low cost. However, Ni-rich LiNi_1-x-yCo_xMn_yO₂ still has the fatal weakness of poor cycle stability, limiting its further wide application. Bulk doping is an effective means to enhance the cycle stability, yet the electrochemical performances are very sensitive to the doping quantity. Here a facile method of co-precipitation is adopted to coat (Ni_0.4Co_0.2Mn_0.4)_1-xAl_x(OH)_2+x on precursor particles of NCM83. Al ions diffuse evenly in the NCM83 particles after sintering. The cells are operated at a high cut-off voltage of 4.5 V. The discharge capacity of NCM83 is 187.8 mAh g^?1, and decays fast with cycles. The doped sample even exhibits a higher discharge capacity of 195 mAh g^?1, and the capacity retention is improved to 83.8% after 200 cycles.     

Melanin-Like Nanomedicine in Photothermal Therapy Applications

Photothermal therapy (PTT) mediated by nanomaterial has become an attractive tumor treatment method due to its obvious advantages. Among various nanomaterials, melanin-like nanoparticles with nature biocompatibility and photothermal conversion properties have attracted more and more attention. Melanin is a natural biological macromolecule widely distributed in the body and displays many fascinating physicochemical properties such as excellent biocompatibility and prominent photothermal conversion ability. Due to the similar properties, Melanin-like nanoparticles have been extensively studied and become promising candidates for clinical application. In this review, we give a comprehensive introduction to the recent advancements of melanin-like nanoparticles in the field of photothermal therapy in the past decade. In this review, the synthesis pathway, internal mechanism and basic physical and chemical properties of melanin-like nanomaterials are systematically classified and evaluated. It also summarizes the application of melanin-like nanoparticles in bioimaging and tumor photothermal therapy (PTT)in detail and discussed the challenges they faced in clinical translation rationally. Overall, melanin-like nanoparticles still have significant room for development in the field of biomedicine and are expected to applied in clinical PTT in the future.     

Rational Designs for Lithium-Sulfur Batteries with Low Electrolyte/Sulfur Ratio

Lithium-sulfur batteries (LSBs) are considered a promising next-generation energy storage device owing to their high theoretical energy density. However, their overall performance is limited by several critical issues such as lithium polysulfide (PS) shuttles, low sulfur utilization, and unstable Li metal anodes. Despite recent huge progress, the electrolyte/sulfur ratio (E/S) used is usually very high (≥20 µL mg⁻¹), which greatly reduces the practical energy density of devices. To push forward LSBs from the lab to the industry, considerable attention is devoted to reducing E/S while ensuring the electrochemical performance. To date, however, few reviews have comprehensively elucidated the possible strategies to achieve that purpose. In this review, recent advances in low E/S cathodes and anodes based on the issues resulting from low E/S and the corresponding solutions are summarized. These will be beneficial for a systematic understanding of the rational design ideas and research trends of low E/S LSBs. In particular, three strategies are proposed for cathodes: preventing PS formation/aggregation to avoid inadequate dissolution, designing multifunctional macroporous networks to address incomplete infiltration, and utilizing an imprison strategy to relieve the adsorption dependence on specific surface area. Finally, the challenges and future prospects for low E/S LSBs are discussed.     

煤矿采空区地表变形评价中的数值模拟分析

采空区的地表变形评价是煤矿灾害评价中的关键问题之一.目前主要是利用《建筑物、水体、铁路及主要井巷煤柱留设与压煤开采规程》中的概率积分法计算地表变形,但其预测结果往往与实际不符.该文以秀房沟煤矿为例,利用概率积分法和三维数值模拟法分别对其采空区地表变形进行预测,结果表明数值模拟法的预测结果比概率积分法的预测结果更接近于实际.结论证明数值模拟法能更好地克服概率积分法中的一些局限,对采空区地表变形的预测效果更佳,可用于煤矿采空区的地表变形评价.     

Fabrication of Co doped MoS2 nanosheets with enlarged interlayer spacing as efficient and pH-Universal bifunctional electrocatalyst for overall water splitting

Exploring inexpensive and active bifunctional electrocatalysts to produce hydrogen and oxygen from water at all pHs is highly desirable. Herein, we report a facile one-step method to prepare vertically aligned Co doped MoS₂ nanosheets with extended interlayer distance on carbon cloth (Co–MoS₂@CC) for full hydrolysis in both alkaline and acidic medium. Co–MoS₂@CC exhibits long-term durability with overpotentials of 56.6 mV and 130 mV for hydrogen generation and 242 mV and 201 mV for oxygen production at 10 mA cm^?2 in basic and acidic conditions, respectively. Moreover, we achieve low voltages of 1.585 V and 1.55 V in basic and acidic conditions respectively for the overall water splitting. We assume that such excellent property of Co–MoS₂@CC may be ascribed to the uncovering of more active sites and high porosity resulted from Co doping, which boosts the conductivity and thus reduces MoS₂ hydrogen adsorption free energy in HER, as well as benefits to catalytic active sites in OER. This one-step doping approach opens up new ways to regulate the intrinsic catalytic activity to catalyze total hydrolysis at all PHs.     

Engineering Silver-Enriched Copper Core-Shell Electrocatalysts to Enhance the Production of Ethylene and C2+ Chemicals from Carbon Dioxide at Low Cell Potentials

Copper catalysts are widely studied for the electroreduction of carbon dioxide (CO₂) to value-added hydrocarbon products. Controlling the surface composition of copper nanomaterials may provide the electronic and structural properties necessary for carbon-carbon coupling, thus increasing the Faradaic efficiency (FE) towards ethylene and other multi-carbon (C₂₊) products. Synthesis and catalytic study of silver-coated copper nanoparticles (Cu@Ag NPs) for the reduction of CO₂ are presented. Bimetallic CuAg NPs are typically difficult to produce due to the bulk immiscibility between these two metals. Slow injection of the silver precursor, concentrations of organic capping agents, and gas environment proved critical to control the size and metal distribution of the Cu@Ag NPs. The optimized Cu@Ag electrocatalyst exhibited a very low onset cell potential of −2.25 V for ethylene formation, reaching a FE towards C₂₊ products (FE_C2+) of 43% at −2.50 V, which is 1.0 V lower than a reference Cu catalyst to reach a similar FE_C2+. The high ethylene formation at low potentials is attributed to enhanced C C coupling on the Ag enriched shell of the Cu@Ag electrocatalysts. This study offers a new catalyst design towards increasing the efficiency for the electroreduction of CO₂ to value-added chemicals.     

Synthesis and characterization of natural rubber-based telechelic oligomers via olefin metathesis

Metathesis degradation and functionalization of natural rubber (NR) were conducted with 1-hexene, 1-octene, 1-decene, 1-dodecene, trans-stilbene, and 4,4′-dibromo-trans-stilbene as chain transfer agents (CTAs) in presence of Grubbs 2nd generation catalyst to generate NR-based telechelic oligomers that had been a long-lasting challenge due to the structure and compositions of NR with various impurities. Orthogonal experiments were applied and the effects of the CTA type, CTA concentration, catalyst concentration, reaction time, and reaction temperature on the formation of telechelic oligomers were studied, indicating that the catalyst concentration was the major factor influencing the number average molecular weights (M_n) and polymer dispersity index (PDI) of telechelic oligomers. The structures of the oligomers were characterized using ¹H NMR, ¹³C NMR, and MALDI-TOF-MS, which confirmed the formation of the designed terminal groups. The results showed that well-defined telechelic oligomers with a M_n of a few thousand and a PDI around 1.6 were obtained, with potential applications in binder, lubricant and many other fields.     

Studies on waterline corrosion processes and corrosion product characteristics of carbon steel in 3.5 wt% NaCl solution

The waterline corrosion behaviors of carbon steel partially immersed in a 3.5 wt% NaCl solution were investigated using the wire beam electrode technique, and the effects of corrosion products on the processes of waterline corrosion were analyzed. The results demonstrated that the initial stage and development stage of waterline corrosion were mainly controlled by the concentration and diffusion of dissolved oxygen, respectively, and the deceleration stage of waterline corrosion was mainly affected by corrosion products. The main component of the yellow corrosion products was γ-FeOOH, and γ-FeOOH that exhibited a high reduction reactivity could be involved in the cathodic reaction. The black corrosion products were mainly composed of Fe₃O₄ with strong thermodynamic stability and the processes of dissolved oxygen diffusion and ion transports were obviously affected due to the continuous accumulation of Fe₃O₄ on the surface of the electrodes. Polarity reversals were observed on the single electrodes below the waterline, but the reasons for the phenomena were different from each other.